Electrical Panel Upgrades in Lincolnwood, IL

Your Electrical Panel Upgrade Specialists

Safe, reliable electrical panel upgrades from licensed electricians with 25 years of emergency electrical experience in Lincolnwood. Our team ensures your home’s electrical system is up to modern standards, providing peace of mind and enhanced safety.

Hear from Our Customers

Lincolnwood Electrical Panel Replacement Services

Power Your Home Safely and Reliably

Your electrical panel is the heart of your home’s electrical system. When it’s outdated or overloaded, you’re living with constant interruptions, safety risks, and appliances that can’t perform at their best. An upgraded electrical panel eliminates those frustrating breaker trips when you’re blow-drying your hair or running the dishwasher. Your lights stop flickering when you turn on the microwave. Your home can finally handle modern appliances, EV charging stations, and whatever technology comes next. You get peace of mind knowing your family is protected from electrical fires and power surges. Your appliances last longer, and your insurance premiums may even decrease because your home is safer and up to current electrical codes.

Licensed Lincolnwood Electrical Panel Contractors

25 Years of Emergency Electrical Expertise

We’ve been solving critical electrical problems for Lincolnwood homeowners for 25 years. We’re the electrical service company you call when your panel is sparking, your breakers won’t reset, or you smell something burning. We’re licensed, bonded, and insured because electrical work isn’t something you gamble with. We know Lincolnwood’s electrical codes, permit requirements, and the unique challenges of older homes in our area. Our focus is residential customers who need reliable, professional service when their electrical system fails them. We’re not the cheapest option, and that’s intentional—you’re investing in expertise that keeps your family safe and your home protected.

Electrical Panel Upgrade Process Lincolnwood

Straightforward Panel Replacement Process

First, we assess your current electrical panel and your home’s power needs. We check for signs of damage, measure your electrical load, and determine if your panel can handle modern appliances, EV charging, or other upgrades you’re planning. Next, we pull the necessary permits with Lincolnwood and coordinate with your utility company for the service disconnect. We remove your old panel completely and install a new one that meets current electrical codes—typically upgrading from 100 amps to 200 amps or more. Finally, we connect your circuits to the new panel, test everything thoroughly, and schedule the required inspection. Once approved, your utility company reconnects your service and you have reliable power that can handle whatever you need.

Ready to get started?

Explore More Services

About Jimco Electric

Get a Free Consultation

Lincolnwood Electrical Panel Upgrade Requirements

What's Included in Your Panel Upgrade

Your electrical panel upgrade includes complete removal of your old panel and installation of a new circuit breaker panel that meets current electrical codes. We handle all permit applications with Lincolnwood, coordinate utility disconnects and reconnects, and ensure your upgrade passes inspection. Lincolnwood homes built more than 20 years ago often need panel upgrades to handle modern electrical demands. If you’re planning to install an EV charging station, add major appliances, or do home renovations, your current panel may not have the capacity you need. We also replace outdated fuse boxes, which are common in older Lincolnwood homes but no longer meet safety standards. Modern circuit breaker panels are safer, more reliable, and give you the electrical capacity your home needs for today’s technology and future upgrades.

How do I know if my Lincolnwood home needs an electrical panel upgrade?

Several signs indicate you need an electrical panel upgrade in your Lincolnwood home. If your breakers trip frequently or won’t reset, that’s a clear signal your panel is overloaded or failing. Flickering or dimming lights when you turn on appliances means your panel can’t handle your electrical load. If you still have a fuse box instead of circuit breakers, you definitely need an upgrade—fuse boxes don’t meet current safety standards. Burning smells, sizzling sounds, or any signs of sparks around your electrical panel require immediate attention. These are dangerous conditions that can lead to electrical fires. If you’re planning to install an EV charger or major appliances, your current panel may not have the capacity to handle the additional load safely.

What size electrical panel do I need for my Lincolnwood home?

Most Lincolnwood homes need at least 200-amp electrical service to handle modern electrical demands. Older homes often have 100-amp or 150-amp panels that were adequate when they were built but can’t handle today’s appliances and technology. If you’re planning to install an EV charging station, you’ll likely need 200-amp service or higher. Level 2 EV chargers require a dedicated 40-60 amp circuit, which older panels often can’t accommodate safely. Homes with electric heating, central air conditioning, electric water heaters, and modern appliances typically need 200-amp service minimum. If you’re doing major renovations or adding significant electrical loads, you might need 300-amp service or more. We’ll assess your specific needs and recommend the right panel size for your home and future plans.

How long does an electrical panel upgrade take in Lincolnwood?

A typical electrical panel upgrade in Lincolnwood takes one to two days once we have permits and materials. The actual installation usually takes 4-8 hours, but the timeline depends on your home’s specific electrical setup and any complications we discover. Before installation, we need to obtain permits from Lincolnwood and coordinate with your utility company for the service disconnect. This process typically takes a few days to a week, depending on permit processing times and utility scheduling. Your power will be off during the installation, usually for 4-6 hours. We’ll work efficiently to minimize disruption to your daily routine. After installation, we schedule the required inspection, and once approved, your utility company reconnects your service. The entire process from start to finish typically takes 1-2 weeks.

Do I need permits for electrical panel upgrades in Lincolnwood?

Yes, electrical panel upgrades in Lincolnwood require permits and inspections. This isn’t red tape—it’s essential for safety and ensures your upgrade meets current electrical codes and standards. We handle all permit applications for you, including the electrical permit and any other required documentation. Lincolnwood requires permits for electric panel upgrades to ensure installations are safe and properly integrated into the local electrical grid. After installation, a licensed inspector examines the work to verify it meets safety and code requirements. Only after passing inspection can your utility company reconnect your service. This process protects you and ensures your electrical system is safe and up to current standards.

How much does an electrical panel upgrade cost in Lincolnwood?

Electrical panel upgrade costs in Lincolnwood vary based on your home’s specific needs, the size of the new panel, and any additional electrical work required. A standard 200-amp panel upgrade typically ranges from $2,000 to $4,000, including permits and labor. Factors that affect cost include the complexity of your electrical setup, whether we need to upgrade your electrical meter, the condition of your existing wiring, and any additional circuits you need. Homes that require significant rewiring or have complicated electrical configurations cost more. However, consider the long-term value: upgraded panels often reduce insurance premiums, prevent costly appliance damage from power surges, and increase your home’s value. Many homeowners find that utility savings and insurance reductions help offset the initial investment over time.

Can I install an EV charger after my panel upgrade?

Yes, upgrading your electrical panel often makes EV charger installation possible and safer. Most Level 2 EV chargers require a dedicated 40-60 amp circuit and 240-volt power, which older panels often can’t provide safely. A 200-amp electrical panel typically has enough capacity for an EV charger plus your home’s other electrical needs. We can assess your electrical load and determine if your upgraded panel can handle EV charging without compromising your home’s other electrical systems. Lincolnwood requires permits for EV charger installations, and proper electrical panel capacity is essential for safe operation. If you’re planning to buy an electric vehicle, upgrading your panel first ensures you’ll have the electrical infrastructure ready when you need it.

Local Resources

Lincolnwood, IL is located in Unknown County in IL State