Hear from Our Customers
You’re not looking for an electrical company that talks about craftsmanship and legacy. You need someone who shows up, diagnoses the problem correctly, and fixes it so you can stop worrying about whether your house is safe.
That’s what we do. When your circuit breaker trips every time you run the microwave and coffee maker together, we figure out why. When you’re adding an EV charger and your panel can’t handle the load, we upgrade it. When you smell burning plastic from a switch plate, we’re there the same day.
Most homes in Bartlett, IL were built in the 1990s and early 2000s. Back then, electrical systems were designed for different demands—fewer devices, no electric vehicles, smaller appliances. Now you’re running heat pumps, Level 2 EV chargers, smart home systems, and high-efficiency appliances all at once. Your 200-amp service is maxed out, and your breakers are doing exactly what they’re supposed to do: protecting you by shutting down.
We don’t just reset breakers and hope for the best. We assess your actual electrical load, identify what’s overloading your system, and give you options that make sense for how you actually live in your home.
We’ve been the local electrical company serving Bartlett, IL since 2000. That’s 25 years of service panel upgrades, emergency repairs, circuit additions, and solving the kind of electrical problems that make homeowners nervous.
We’re licensed, bonded, and insured—not because it sounds good in marketing, but because it protects you if something goes wrong. We focus primarily on residential electrical work, though we handle commercial projects when they make sense. Our typical customer is a homeowner dealing with an urgent electrical issue who needs someone reliable to show up and fix it correctly.
We also offer discounts for military members, first responders, seniors, teachers, students, and new customers. Not as a gimmick, but because we live and work in this community too.
You call or submit a request online. We ask a few questions about what’s happening—what you’re seeing, hearing, or smelling. If it’s an emergency (burning smell, sparks, smoke, complete power loss), we prioritize it and get someone out fast.
When we arrive, we don’t assume we know the problem. We test, inspect, and diagnose. Sometimes a tripping breaker means you need a dedicated circuit. Sometimes it means your panel is undersized. Sometimes it’s a failing breaker that needs replacement. We explain what we find in plain terms, not electrical code language.
Then we give you a clear price for the repair or upgrade. If it’s something you can delay, we tell you. If it’s a safety issue that needs immediate attention, we tell you that too. Once you approve the work, we complete it on the same trip whenever possible. We test everything before we leave, and we clean up after ourselves.
You’re not waiting days for a follow-up visit or wondering if the problem is actually fixed. We handle it, verify it works, and move on so you can too.
Ready to get started?
We handle the electrical work that homeowners in Bartlett, IL actually need. That includes emergency repairs for power outages, tripping breakers, flickering lights, and burning smells. We install EV chargers—both Level 1 and Level 2—and make sure your panel can support the load without overloading your system.
We upgrade electrical panels when your current service can’t keep up with modern demand. Most homes here have 200-amp service, which sounds like a lot until you’re running central air, an electric range, a heat pump water heater, and charging a vehicle overnight. We assess your total load and recommend upgrades only when they’re actually necessary.
We also add new circuits for home additions, kitchen remodels, or dedicated appliance lines. We install AFCI and GFCI protection where code requires it—or where it makes sense for safety even if it’s not required. These devices prevent electrical fires and electrocution, and they’re especially important in older homes that were built before modern safety standards.
If you’re dealing with frequently tripping breakers, outlets that don’t work, switches that spark, or any situation where you’re not sure if it’s dangerous, we’ll come assess it. We don’t upsell you on work you don’t need, and we don’t downplay safety issues to make the job easier.
Your breakers trip frequently, especially when you’re running multiple appliances at once. You hear buzzing or humming from your panel. You see scorch marks, smell burning plastic, or notice your panel is warm to the touch. Those are all signs your panel is either failing or undersized for your current electrical load.
Most homes in Bartlett, IL were built in the 1990s with 200-amp service, which was plenty at the time. But if you’ve added an EV charger, upgraded to a heat pump, installed a tankless water heater, or added any major appliances, you’re likely pushing your system to its limit. Modern homes often need 50% more capacity than homes built just 15 years ago.
We assess your actual usage and calculate your load to determine whether you need an upgrade or if we can solve the problem with dedicated circuits or load management. Not every tripping breaker means you need a $3,000 panel replacement. Sometimes it’s a $300 circuit addition. We’ll tell you which one applies to your situation.
Turn off the breaker that controls that outlet or switch immediately. Don’t use it until we inspect it. A burning smell means something is overheating—usually a loose connection, damaged wiring, or a failing device. This is one of the early warning signs of an electrical fire.
Electrical fires cause roughly 40,000 house fires every year, and many of them start with a burning smell that gets ignored. You’re not overreacting by calling us the same day. You’re catching a problem before it becomes a disaster.
When we inspect it, we’ll check the wiring connections, test the circuit for faults, and determine whether the outlet, switch, or wiring needs replacement. Sometimes the fix is simple—a loose wire that needs to be reconnected properly. Other times it’s more involved, like replacing damaged wiring inside the wall. Either way, you’ll know exactly what’s wrong and what it takes to fix it safely.
It depends on your current panel capacity and what else is running in your home. A Level 2 EV charger typically draws 40 to 50 amps, which is a significant load. If you’re already running a heat pump, electric water heater, range, and central air, your 200-amp service might be maxed out.
We calculate your total electrical load before installing an EV charger to make sure your system can handle it. If your panel is near capacity, we’ll either recommend a panel upgrade or install a load management system that prevents multiple high-draw appliances from running simultaneously. Some newer systems can automatically reduce your EV charging speed when your dryer or oven kicks on, keeping your total load within safe limits.
This isn’t something you want to guess at. Overloading your panel doesn’t just trip breakers—it creates a fire hazard. We make sure your EV charger installation is done correctly and safely, with the right wire gauge, breaker size, and panel capacity to support it long-term.
Your lights are flickering because a large appliance is drawing a surge of power when it starts up, causing a temporary voltage drop on that circuit. This is common with air conditioners, refrigerators, space heaters, and other motor-driven appliances. If it happens occasionally and stops after a second, it’s usually not a major concern.
But if your lights flicker constantly, dim significantly, or flicker even when you’re not running major appliances, that’s a different problem. It could mean loose wiring connections, an overloaded circuit, or an issue with your electrical panel. It could also indicate a problem with the utility connection outside your home.
We test the circuit, check your panel connections, and measure voltage levels to figure out what’s causing it. Sometimes the fix is adding a dedicated circuit for the appliance. Other times it’s tightening connections or replacing a failing breaker. Persistent flickering isn’t something to ignore—it’s often an early sign of a bigger electrical issue that will get worse over time.
It depends entirely on what needs to be done. A simple outlet replacement might cost $150 to $250. Adding a new dedicated circuit typically runs $300 to $800 depending on distance and complexity. A full panel upgrade usually falls between $2,500 and $5,000 depending on the size and whether we need to upgrade your service from the utility.
We don’t give vague estimates or show up and surprise you with costs. We diagnose the issue, explain what needs to happen, and give you a clear price before we start any work. If there are multiple ways to solve the problem—like adding a circuit versus upgrading a panel—we’ll explain the cost difference and let you decide what makes sense for your situation and budget.
We also offer discounts for military members, first responders, seniors, teachers, students, and new customers. Those aren’t conditional or fine-print discounts. If you qualify, we apply it. Our goal is to fix your electrical problem correctly and safely, not to maximize the invoice.
Yes, especially if your home was built before modern electrical codes required them. GFCI (Ground Fault Circuit Interrupter) devices prevent electrocution by shutting off power when they detect a ground fault—like when a hair dryer falls into a sink full of water. They’re required in bathrooms, kitchens, garages, and outdoor outlets, and they could prevent nearly half of all home electrocutions.
AFCI (Arc Fault Circuit Interrupter) devices prevent electrical fires by detecting dangerous arcing conditions in your wiring—like a nail through a wire or a damaged cord. Arc faults cause about 40,000 house fires every year, and AFCIs can prevent roughly half of them. They’re now required in most living spaces in new construction, but older homes don’t have them unless they’ve been updated.
If your home was built in the 1990s or early 2000s, you probably don’t have full AFCI protection. We can add AFCI breakers to your panel or install combination AFCI/GFCI outlets in specific rooms. It’s not the most exciting upgrade, but it’s one of the most effective ways to reduce fire and shock risk in your home. We’ll tell you where code requires it and where it makes sense even if it’s not required.
Local Resources
