Hear from Our Customers
You flip a switch and nothing happens. Or worse, you smell something burning near your electrical panel. These aren’t problems you can ignore until Monday morning.
When your electrical system fails, you need someone who answers the phone and shows up ready to fix it. That’s what a local electrical company in Broadview should do—diagnose the problem fast, explain what’s wrong in plain terms, and get your power back on without dragging out the job.
The outcome you’re looking for is simple: lights that work, outlets that don’t spark, and confidence that your home’s electrical system won’t catch fire in the middle of the night. You want the problem fixed correctly the first time, by someone who’s licensed and insured, so you’re not calling someone else to redo the work next month.
We’ve been handling residential and commercial electrical work in Broadview for over 25 years. We’re licensed, bonded, and insured—not because it sounds good in an ad, but because it protects you if something goes wrong.
Most of our calls come from homeowners dealing with urgent problems: flickering lights, tripped breakers that won’t reset, burning smells from outlets, or outdated panels that can’t handle modern electrical loads. Broadview homes, especially older ones built before the 1970s, often have electrical systems that weren’t designed for today’s demands—central air, electric vehicle chargers, home offices with multiple devices running simultaneously.
We show up, figure out what’s actually wrong (not just what looks wrong), and fix it so it stays fixed. We also offer discounts for military members, first responders, seniors, and teachers—people who’ve earned a break.
You call or message us with your electrical issue. We ask a few questions to understand what’s happening—when it started, what you’ve noticed, whether it’s getting worse. This helps us know what to bring and how urgent the situation is.
We schedule a time that works for you, or if it’s an emergency, we come out as soon as possible. When we arrive, we diagnose the problem first. No guessing, no upselling you on work you don’t need.
Once we know what’s wrong, we explain it in terms that make sense—not electrical code jargon. We give you an upfront price before we start any work. If you approve, we fix it. If the job requires a permit (like panel upgrades or major rewiring), we handle that process so you don’t have to chase down paperwork at Village Hall.
After the work’s done, we test everything to make sure it’s functioning correctly and safely. You get a clear explanation of what we did and any recommendations for future maintenance—but we’re not going to pressure you into scheduling something you don’t need right now.
Ready to get started?
When you hire an electrical company in Broadview, IL, you should get more than someone who knows how to wire an outlet. You need someone who understands how electrical systems fail and how to prevent those failures from happening again.
Our work covers emergency repairs—things like power outages, sparking outlets, breakers that trip repeatedly, and burning smells from your electrical panel. We also handle panel upgrades for homes that need more capacity, especially if you’re adding an EV charger or finishing a basement. Circuit additions, whole-house rewiring, lighting installations, and electrical safety inspections are all part of what we do.
Broadview’s housing stock includes many older homes where electrical systems haven’t been updated in decades. According to national fire safety data, homes with electrical systems installed before 1970 have nearly three times the fire risk of newer homes. That’s not meant to scare you—it’s just the reality of aging infrastructure. Upgrading your panel, adding AFCI and GFCI protection, and replacing outdated wiring reduces that risk significantly.
You also get transparent pricing. We tell you the cost before we start. No surprise charges when the job’s done, no “oh, we found something else” upsells unless there’s a genuine safety issue we need to address.
The cost depends entirely on what needs to be fixed or installed. A simple outlet repair might run a couple hundred dollars. A full panel upgrade typically costs between $1,500 and $3,000, depending on the amperage and whether your home needs additional work to meet current code.
Emergency calls outside normal business hours usually cost more because you’re paying for availability—someone dropping what they’re doing to come help you at 9 p.m. on a Saturday. That said, if your electrical panel is sparking or you smell burning plastic near your outlets, waiting until Monday to save $100 isn’t worth the risk.
We give you the price upfront, before any work starts. If the job turns out to be more complicated once we open up a wall or panel, we’ll explain why and give you an updated price before moving forward. You’re never locked into something you didn’t agree to.
It depends on the scope of the work. Minor repairs—like replacing an outlet, fixing a light fixture, or resetting a breaker—typically don’t require a permit. Larger jobs like panel upgrades, adding new circuits, or rewiring parts of your home usually do.
Broadview follows the Illinois State Fire Marshal’s electrical code requirements, which means any work that involves your main electrical panel or adds new circuits needs to be permitted and inspected. This isn’t red tape for the sake of paperwork—it’s a safety check to make sure the work was done correctly and won’t cause a fire or shock hazard down the road.
If your job requires a permit, we handle the filing and coordinate the inspection. You don’t need to take time off work to meet an inspector or figure out what forms to submit. We’ve been doing this for 25 years—we know the process and we know what inspectors look for.
First, unplug everything on that circuit and try resetting the breaker. If it stays on, you’re likely overloading the circuit—too many devices pulling power at once. If it trips again immediately, even with nothing plugged in, you’ve got a bigger problem: a short circuit, a ground fault, or a failing breaker.
Don’t keep resetting a breaker that won’t stay on. That’s your electrical system telling you something’s wrong. Ignoring it can lead to overheating, damaged wiring, or an electrical fire.
Call an electrical company in Broadview to diagnose the issue. We’ll check the circuit for shorts, test the breaker itself, and inspect your panel for signs of damage or overheating. Sometimes the fix is simple—a bad breaker that needs replacing. Other times, it’s a wiring issue that requires more in-depth work. Either way, you’ll know exactly what’s wrong and what it’ll take to fix it.
If your home still has a 60-amp or 100-amp panel, you’re probably due for an upgrade. Modern homes typically need at least 200 amps to handle the electrical load from HVAC systems, kitchen appliances, electric vehicle chargers, and all the devices we use daily.
Signs your panel is undersized: breakers trip frequently, lights dim when you run the microwave or air conditioner, or you’re constantly unplugging things to avoid overloading a circuit. If your panel has a warm smell, visible rust, or scorch marks, that’s an urgent safety issue—call us immediately.
Older panels, especially Federal Pacific or Zinsco brands, are known fire hazards. These panels have breakers that fail to trip during an overload, which means wires can overheat without the breaker shutting off power. If you have one of these panels, upgrading isn’t optional—it’s a safety necessity. We can assess your current panel, explain whether it’s adequate for your home’s needs, and give you a clear price for upgrading if needed.
Yes, but it’s not as simple as plugging in a new appliance. Most electric vehicle chargers require a dedicated 240-volt circuit, which means running new wiring from your electrical panel to your garage or driveway. Depending on your current panel’s capacity, you may also need a panel upgrade to handle the additional load.
A Level 2 EV charger typically draws 30 to 50 amps, which is a significant electrical demand. If your panel is already near capacity, adding that load without upgrading can cause breakers to trip or, worse, overheat your electrical system.
We handle the full installation: assessing your panel, running the necessary wiring, installing the charger, and pulling permits if required. Broadview and surrounding municipalities have specific code requirements for EV charger installations, including GFCI protection and proper grounding. We make sure everything meets code so you don’t run into issues during an inspection or when you go to sell your home.
A licensed electrical contractor has passed state exams, met experience requirements, and carries insurance to protect you if something goes wrong. An unlicensed contractor—or a handyman doing electrical work on the side—has none of that.
If unlicensed work causes a fire or someone gets hurt, your homeowner’s insurance may refuse to cover the damage. You’re also on the hook if the work doesn’t meet code and fails an inspection. Fixing someone else’s bad electrical work often costs more than hiring a licensed contractor in the first place.
In Illinois, electrical work must be performed by a licensed electrician to meet code and pass inspection. That’s not just a legal requirement—it’s a safety standard. We’re licensed, bonded, and insured, which means you’re protected if something goes wrong, and the work is guaranteed to meet state and local electrical codes.
Local Resources
