Hear from Our Customers
You flip a switch and the lights stay on. You plug in your phone and nothing sparks. You run the microwave, the AC, and charge your car without tripping a breaker every other day.
That’s what working electrical looks like. Most homes in Downers Grove weren’t wired for how you live now. You’ve got more devices, bigger appliances, maybe an EV charger on the way. Your panel’s doing its best, but it’s struggling.
We upgrade panels, add circuits, fix the weird outlet that gets warm, and stop the lights from dimming every time the fridge kicks on. You shouldn’t have to think about your electrical system. When we’re done, you won’t have to.
We’ve been handling electrical emergencies in Downers Grove since 1999. We’re licensed, bonded, and insured, which matters when someone’s working inside your walls.
Most of our work is residential. Panels that can’t keep up. Circuits that need adding. Burning smells that shouldn’t be ignored. The stuff that makes you nervous at night.
We also offer discounts for military, first responders, seniors, teachers, and students. Not because it’s good marketing, but because this town has people who deserve a break when something goes wrong.
You call or message us with the problem. We ask a few questions to figure out if it’s urgent or something we can schedule. If it’s an emergency, we move fast.
We show up, look at what’s going on, and explain what needs fixing. No jargon. No upselling. If your panel’s outdated and can’t handle an EV charger, we’ll tell you. If it just needs a new breaker, we’ll tell you that too.
Once you’re good with the plan, we handle the work, pull permits if needed, and coordinate inspections. For panel upgrades, that includes working with ComEd and making sure everything passes code. You’re not left guessing what happened or whether it’s safe.
Ready to get started?
A lot of homes in Downers Grove are 20 to 30 years old. They’ve got 100-amp panels that were fine in the ’90s but can’t handle modern life. Add a few smart devices, a high-efficiency HVAC system, and an EV charger, and you’re pushing limits.
We upgrade panels to 200 amps so you’ve got room to grow. We install dedicated circuits for EV chargers, usually 240-volt, 40-50 amp lines that charge your car overnight without issue. We fix flickering lights, outlets that don’t work, and breakers that trip for no clear reason.
Every job includes permits and inspections. In Downers Grove, that means coordinating with the local inspector, usually within 24 to 48 hours. We also make sure your new panel has GFCI and AFCI protection, which is required by current code and cuts down on fire risk.
Your breakers trip when you’re running normal stuff. Lights flicker when the AC kicks on. Outlets feel warm to the touch. You smell something burning but can’t find the source.
Those are the warning signs. Most older panels in Downers Grove are rated for 100 amps or less. That was enough before you had a home office, electric car, smart thermostat, and about 47 things plugged in at once.
If you’re adding an EV charger, you almost definitely need an upgrade. Most Level 2 chargers need a dedicated 240-volt circuit with 40 to 50 amps. If your panel’s already maxed out, there’s no safe way to add that without more capacity.
We pull a permit, install a new breaker box with higher amperage, rewire connections, and upgrade your grounding system. Then we coordinate with ComEd to disconnect and reconnect power safely.
After that, we schedule an inspection with the local electrical inspector. In Downers Grove, inspections usually happen within a day or two. The inspector checks that everything meets code, including GFCI and AFCI protection.
The whole process takes a day, sometimes two if there are complications. You’ll be without power for a few hours during the ComEd switchover, but we try to schedule that during a time that works for you. Once it’s done, you’ve got a system that can handle what you’re actually using.
Sometimes, but not usually. Most EV chargers need their own dedicated 240-volt circuit with 40 to 50 amps. If your panel’s already running at capacity, adding that kind of load isn’t safe.
We’ll come out, look at your current setup, and tell you what’s possible. If your panel’s got room and the wiring can handle it, we can add the circuit without a full upgrade. If not, we’ll recommend upgrading to 200 amps first.
That might sound like overkill, but it future-proofs your home. You’ll have capacity for the charger, plus room for anything else you add down the line. And you won’t be dealing with tripped breakers every time you plug in your car.
It depends on what’s broken. A simple repair might be a couple hundred bucks. A full panel upgrade with permits and inspection usually runs a few thousand.
In the Chicago area, electricians charge between $75 and $150 per hour, but we price by the job, not the hour. That way you know what you’re paying upfront.
We offer discounts for military, first responders, seniors, teachers, new customers, and students. If you qualify, let us know when you call. We’re not the cheapest option in town, but we’re licensed, insured, and we’ve been doing this for 25 years. You’re paying for work that’s done right the first time.
Yes. If something’s sparking, smoking, or you’ve lost power and don’t know why, call us. Electrical emergencies don’t wait for business hours.
We prioritize urgent calls. That means if there’s a safety risk, we move you to the front of the line. Most electrical fires start with small warning signs—burning smells, warm outlets, lights that flicker constantly. If you’re seeing any of that, don’t wait.
Electrical failures cause about 6% of home fires in the U.S., and the average claim is around $45,000 in damage. We’d rather fix the problem before it gets to that point. If it’s truly an emergency, we’ll get someone out as fast as we can.
Because electrical work kills people. Over 15,000 Americans end up in the ER every year from appliance-related injuries, and nearly 40% of those happen during DIY attempts.
Even if the power’s off, capacitors in some devices hold a charge for hours or days. You can get shocked by something that’s been unplugged for a while. And if you wire something wrong, you won’t know until it starts a fire.
We’re licensed, which means we’ve passed exams, logged thousands of hours, and we know the code. We pull permits, schedule inspections, and make sure the work is safe. If something goes wrong later, our insurance covers it. If you do it yourself and something goes wrong, your homeowner’s insurance might not.
Local Resources
