Hear from Our Customers
You flip a switch and nothing happens. Or worse—you smell something burning near your electrical panel. These aren’t problems you can ignore until Monday.
When your electrical system fails, you need someone who answers the phone and shows up ready to fix it. Not someone who books you out three weeks or talks in circles about what “might” be wrong.
A working electrical system means your food stays cold, your heat runs when it’s 20 degrees outside, and you’re not lying awake wondering if that flickering light is about to start a fire. You get your house back to normal without the runaround. That’s what matters when you’re standing in the dark at 9 PM on a Tuesday.
Most electrical problems in Lansing homes come down to a few common issues: outdated panels that can’t handle modern loads, circuits that trip because they’re overloaded, or wiring that’s degraded over time. The fix isn’t always complicated, but it does need to be done right the first time.
We’ve been handling residential electrical work in Lansing since 1999. We’re licensed, bonded, and insured—not because it sounds good in an ad, but because that’s what protects you if something goes sideways.
Most of our work is emergency repairs and panel upgrades. The calls we get aren’t usually planned projects. They’re “the power went out in half my house” or “my breaker keeps tripping and I don’t know why.”
Lansing homes—especially the older ones near the Indiana border—weren’t built for how much power you’re using now. Your electrical panel from 2005 wasn’t designed to run central air, a home office setup, kitchen appliances, and an EV charger all at once. When you add up the load, something’s got to give. We see it constantly, and we know how to fix it without tearing apart your whole house.
You call or text us with the problem. We ask a few questions to understand what’s going on—not to stall, but so we show up with the right equipment and don’t waste your time with a second trip.
We give you an arrival window and stick to it. When we get there, we diagnose the issue and explain what’s wrong in plain terms. No jargon, no upselling you on stuff you don’t need.
Once you approve the work, we fix it. If it’s an emergency repair, we prioritize getting your power back on safely. If it’s a panel upgrade or circuit addition, we walk you through what we’re doing and why it matters for code compliance.
After the work’s done, we test everything to make sure it’s working correctly. You get documentation of what was done, and if an inspection’s required, we handle that coordination. The goal is simple: you have a safe, functional electrical system and you understand what was fixed.
Ready to get started?
Emergency electrical repairs are the bulk of what we do. Flickering lights, outlets that don’t work, breakers that won’t stop tripping, burning smells near your panel—these are the calls we take every day. You’re not overreacting if something feels off with your electrical system. Trust that instinct.
Panel upgrades are becoming more common in Lansing, especially as homeowners add EV chargers or upgrade to heat pumps. Most homes built before 2010 have 100-amp or 150-amp panels. That’s not enough for modern electrical loads. We’ll assess your current panel, calculate your actual power needs, and upgrade you to a 200-amp service if that’s what your house requires.
Circuit additions are necessary when you’re adding new appliances or equipment that your current wiring can’t support. Installing a Level 2 EV charger, for example, typically requires a dedicated 240-volt circuit. We run new circuits from your panel to wherever you need power, making sure everything’s up to current National Electrical Code standards.
With Lansing’s average electricity rate at 14.41 cents per kWh, an inefficient or outdated electrical system isn’t just a safety issue—it’s costing you money every month. Properly balanced circuits and a right-sized panel help your system run more efficiently.
Your panel probably needs an upgrade if your breakers trip frequently, you see rust or corrosion on the panel box, you smell burning near the panel, or you’re adding major appliances like an EV charger or heat pump.
Another clear sign: your panel is 100 amps or less and your house was built before 2010. Modern homes draw significantly more power than older electrical systems were designed to handle. Between computers, TVs, kitchen appliances, HVAC systems, and charging stations, you’re likely pushing your panel past its safe capacity.
If you’re planning to install a Level 2 EV charger, about 20% of homes need a panel upgrade first. That charger alone can draw 40-50 amps, which is half of what a 100-amp panel provides for your entire house. It’s not optional—it’s a safety requirement and a code issue.
Any situation where you smell burning, see sparks, or have a complete power loss in part of your home counts as an emergency. These aren’t “wait and see” problems.
Burning smells near outlets or your electrical panel usually mean wiring is overheating. Sparks from outlets or switches indicate a serious short circuit or loose connection. Both can lead to electrical fires, which cause about 51,000 home fires annually in the U.S.
If your power goes out in specific rooms but not others, that’s often a tripped breaker or a failed circuit. While not always an immediate fire risk, it can indicate your system is overloaded or there’s a fault somewhere in your wiring. Getting it checked quickly prevents bigger problems down the line.
Panel upgrades in Lansing typically range from $2,000 to $5,000 depending on the scope of work, your current panel’s condition, and whether we need to upgrade your service line from the street.
A straightforward swap from a 100-amp to 200-amp panel with no major complications usually falls on the lower end. If your service line from the utility pole needs upgrading, or if your panel location needs to be moved to meet current code, costs go up.
The price includes the new panel, labor, permits, and inspection coordination. We give you a clear quote before starting any work. Keep in mind that 25% of homeowners have $500 or less saved for emergency repairs, so if cost is a concern, ask us about financing options or our various discounts for military, seniors, teachers, and first responders.
Yes, we install Level 2 EV chargers for homeowners throughout Lansing. The process involves assessing your current electrical panel capacity, running a dedicated 240-volt circuit, and mounting the charging unit where you park.
Most EV chargers require a 40-50 amp dedicated circuit. If your panel doesn’t have the capacity or available breaker slots, we’ll need to upgrade your panel first. This is common—most homes built before 2010 need this upgrade before adding a charger.
EV charger installations jumped 57% in a single quarter recently, and the demand isn’t slowing down. Every EV represents a potential $2,000 to $5,000 electrical job when you factor in the charger installation and any necessary panel work. We handle the entire process from start to finish, including permits and inspections.
We offer same-day service for emergency electrical issues when our schedule allows. If you call in the morning with an urgent problem, we do everything possible to get someone to your house that day.
Emergency situations—power outages, burning smells, sparking outlets—get priority scheduling. Non-emergency work like adding circuits or upgrading panels typically requires scheduling in advance, though we work to accommodate your timeline.
Nearly 75% of homeowners have had at least one home repair emergency in the past year. When your electrical system fails, you can’t just wait it out. We understand that, which is why we prioritize rapid response for residential electrical emergencies in Lansing.
Yes, we’re fully licensed, bonded, and insured to perform electrical work in Lansing and throughout Illinois. This isn’t just a checkbox—it’s your protection if something goes wrong.
A licensed electrical contractor has met state requirements for training, testing, and insurance. We carry liability insurance and workers’ compensation, which means if there’s an accident or damage during the job, you’re covered. Hiring an unlicensed electrician might save you money upfront, but it puts you at serious financial and legal risk.
Illinois requires permits for most electrical work, and inspections to verify the work meets National Electrical Code standards. We handle all of that. If you ever sell your home, unpermitted electrical work can kill a deal or force you to pay for expensive corrections. Do it right the first time with a licensed electrical company in Lansing, IL.
Local Resources
