Electrical Panel Upgrades in Romeoville, IL

Stop Living With Flickering Lights and Tripping Breakers

Your electrical panel upgrade eliminates dangerous overloads and gives your home the reliable power it deserves.

An electrician Cook and Will County, IL, wearing a hard hat, safety glasses, and orange work pants inspects electrical cables in a building under construction, with tools and wires scattered around.

Hear from Our Customers

A person in a plaid shirt uses a screwdriver to work inside an open desktop computer case; various cables and computer components are visible, and a hard drive lies on the table nearby—typical tasks for Electrical Services Cook and Will County, IL.

Residential Panel Upgrades Romeoville

Your Home Gets Reliable Power That Actually Works

You flip a switch and the lights stay on. Your breakers stop tripping when you run the dishwasher and microwave at the same time. No more flickering when the AC kicks on.

Your appliances run smoothly without dimming the lights or overloading circuits. You can charge your devices, run your HVAC system, and use modern electronics without worrying about your electrical system failing.

The burning smell is gone. The hot outlets are fixed. Your family is safe from electrical fires and power surges that damage expensive equipment.

Electrical Panel Installation Romeoville

25 Years Solving Romeoville's Electrical Problems

We’ve been handling emergency electrical repairs and panel upgrades in Romeoville for over two decades. We’re licensed, bonded, and insured professionals who understand exactly what goes wrong with older electrical systems.

We’ve seen every type of panel failure – from Federal Pacific boxes that won’t trip properly to overloaded 100-amp systems trying to power modern homes. Our team knows how to diagnose the real problem and fix it right the first time.

Romeoville homeowners trust us because we show up when promised, explain what’s wrong in plain language, and don’t disappear after the job is done.

An electrician Cook and Will County, IL, wearing blue and orange protective gloves uses a yellow screwdriver to work on an electric meter box mounted on a wall.

Circuit Breaker Panel Upgrade Process

Here's Exactly What Happens During Your Upgrade

First, we inspect your current panel and test your circuits to identify the real problem. We’ll check for loose connections, measure voltage, and determine if you need a simple replacement or a full service upgrade.

Next, we coordinate with ComEd to safely disconnect power while we install your new panel. We replace the old breaker box with a modern 200-amp system that can handle today’s electrical demands. All wiring connections are secured and tested.

Finally, we restore power and test every circuit to make sure everything works properly. We’ll walk you through your new panel, show you where the main breaker is, and explain how the system protects your home. The whole process typically takes 6-8 hours.

An electrician in Cook and Will County uses a screwdriver to adjust or install electrical circuit breakers inside a control panel, with various colored wires and components visible, showcasing expert IL Electrical Services.

Ready to get started?

Explore More Services

About Jimco Electric

Get a Free Consultation

Electrical Service Upgrade Romeoville

What Your Panel Upgrade Actually Includes

Your upgrade includes a new 200-amp electrical panel with modern circuit breakers that actually trip when they’re supposed to. You get proper grounding, updated meter connections, and wiring that meets current electrical codes.

Many Romeoville homes built before 1990 have 100-amp or 150-amp service that can’t handle modern appliances. Your upgrade provides the capacity for electric vehicle chargers, smart home systems, and high-efficiency HVAC equipment.

The installation includes permits, inspections, and coordination with your utility company. You also get surge protection options to prevent damage from power spikes that are common in our area during storms.

A person’s hands using a red cordless drill to work on an electrical breaker panel with multiple wires and switches, showcasing professional electrical services in Cook and Will County, IL.

How do I know if my electrical panel needs to be upgraded?

Your panel needs upgrading if lights flicker when appliances turn on, breakers trip frequently, or you smell burning around the electrical box. These are signs your system is overloaded or failing. Other warning signs include hot outlets, buzzing sounds from the panel, or needing multiple extension cords because you don’t have enough outlets. If your home was built before 1990 and still has the original panel, it’s likely undersized for today’s electrical demands. Romeoville homes typically had 60-amp or 100-amp service when built, but modern homes need at least 200 amps to safely power appliances, electronics, and HVAC systems without overloading circuits.
Electrical panel upgrades in Romeoville typically cost between $1,300 and $3,000 for a standard 200-amp installation. The exact price depends on your current setup, the amperage you need, and whether additional wiring work is required. A simple panel replacement where the wiring is in good condition costs less than a full service upgrade that includes new meter connections and updated wiring. Most Romeoville homeowners choose 200-amp service, which provides enough capacity for modern appliances and future electrical needs. The investment pays for itself through improved safety, fewer electrical problems, and the ability to use high-efficiency appliances that can lower your energy bills over time.
Most electrical panel upgrades take 6-8 hours to complete, though the timeline depends on the complexity of your installation and whether additional wiring work is needed. We coordinate with ComEd to temporarily disconnect power during the installation. You’ll be without electricity for several hours while we install the new panel, but we work efficiently to minimize the disruption to your daily routine. Complex upgrades that require new service lines or significant rewiring may take longer and could require a second day to complete. We’ll give you a realistic timeline before starting work so you can plan accordingly.
Electrical panel upgrades must be performed by a licensed electrician in Illinois. This work involves high-voltage connections that can be deadly if handled incorrectly, and it requires permits and inspections to ensure safety. DIY electrical work on panels is illegal in most municipalities and will void your homeowner’s insurance if something goes wrong. Professional electricians have the training, tools, and experience to work safely with live electrical systems. Licensed electricians also coordinate with your utility company for the power disconnection, pull the necessary permits, and ensure the installation meets current electrical codes. This protects your family and ensures your home insurance remains valid.
The amperage rating determines how much electrical current your panel can safely handle. Higher amperage means you can run more appliances and electronics simultaneously without overloading circuits. 100-amp service was standard in older homes but struggles with modern electrical demands. It’s barely adequate for basic lighting, appliances, and a small air conditioning unit. 150-amp service provides more capacity but still limits your ability to add high-power devices. 200-amp service is the current standard for new construction and provides enough capacity for modern appliances, electric vehicle chargers, smart home systems, and future electrical needs. Most Romeoville homeowners upgrading from older panels choose 200-amp service.
We offer discounts for military personnel, first responders, seniors, teachers, new customers, and students. These discounts help make essential electrical safety upgrades more affordable for Romeoville families. All electrical panel installations come with manufacturer warranties on the equipment and labor warranties on the installation work. This protects your investment and ensures any issues with the installation are covered. We also provide emergency service if you experience electrical problems after the upgrade. Having a reliable local electrician who stands behind their work gives you peace of mind that your electrical system will continue working properly.