Hear from Our Customers
You’re not looking for a lecture about electrical theory. You need your power back on, your family safe, and your home working again.
That’s what happens when you call. Within two hours, a licensed electrician arrives with a fully stocked truck and the diagnostic equipment to figure out what’s actually wrong. Not a temporary patch or a “we’ll come back tomorrow” promise. A real fix, done right, so you can stop worrying about whether that burning smell means your house is about to catch fire.
We’ve spent 25 years handling emergency electrical repairs in Franklin Park. The flickering lights that mean your connections are loose. The breaker that keeps tripping because your panel can’t handle what you’re plugging in. The outlets that spark when they shouldn’t. These aren’t minor annoyances. They’re safety hazards, and they don’t wait for business hours.
We’ve been serving residential customers in Franklin Park for over two decades. We’re licensed, bonded, and insured, which matters more than most people realize until something goes wrong.
Franklin Park homes deal with specific electrical challenges. Winter puts serious strain on your system when heaters run constantly and holiday lights add extra load. Older homes in the area often have panels that weren’t designed for modern electrical demands. You’re running more devices, charging more equipment, and asking your electrical system to do more than it was built for.
We know Franklin Park’s electrical codes, we understand the seasonal demands on your system, and we show up when you need us. That’s not marketing talk. That’s what we’ve been doing here for 25 years.
You call or text us with your electrical problem. We ask a few quick questions to understand what’s happening and whether it’s an emergency that needs immediate attention.
If you need same-day service, we dispatch a licensed electrician to your home within two hours. They arrive in a fully stocked truck with the diagnostic equipment and replacement parts needed to fix most electrical issues on the spot.
The electrician runs a complete diagnostic to identify not just the immediate problem, but any underlying issues that could cause future failures. You get upfront pricing before any work starts. No surprise charges, no hidden fees, even on emergency calls.
Once you approve the work, we fix the problem permanently. Not a temporary workaround. We test everything to make sure your electrical system is safe and code-compliant. Then we clean up and walk you through what we did and why.
Ready to get started?
You get a licensed professional who carries liability coverage and workers compensation, so you’re protected if something goes wrong. That matters when someone’s working with 240 volts in your home.
You get diagnostic testing with professional equipment that identifies problems your breaker panel isn’t telling you about. Loose connections, overloaded circuits, outdated wiring that’s becoming a fire hazard. The electrical inspection catches these before they become emergencies.
You get permanent electrical repairs, not temporary fixes. When we replace a circuit breaker or upgrade your panel, it’s done to code and built to handle your actual electrical load. When we install an EV charger circuit, it’s sized correctly for your vehicle and your home’s capacity.
Franklin Park homeowners are dealing with rising electricity costs and aging electrical systems. Your average monthly bill is around $91, but that number climbs fast when your system is inefficient or your panel forces you to run space heaters because your main heating circuit keeps tripping. Proper electrical wiring and a correctly sized panel actually save you money over time.
We also offer discounts for military, first responders, seniors, teachers, students, and new customers, because we’ve been part of this community long enough to know who keeps it running.
Your breaker trips frequently, especially when you run multiple appliances at once. That’s the most obvious sign your panel can’t handle your electrical load.
You see scorch marks or smell burning near your panel. This is serious. It means connections are overheating, and that’s how electrical fires start. Don’t wait on this one.
Your home still has a fuse box instead of circuit breakers, or your panel is over 25 years old. Older panels weren’t designed for modern electrical demands. You’re running computers, charging stations, kitchen appliances, HVAC systems, and entertainment equipment that didn’t exist when your panel was installed. If you’re planning to add an EV charger, your panel almost certainly needs an upgrade to handle the additional 240-volt circuit.
Stop using that outlet or switch immediately. Don’t plug anything else into it, and don’t flip the switch to test it.
If you can safely access your electrical panel, turn off the breaker that controls that outlet or switch. If you’re not sure which breaker it is, or if the smell is strong, turn off your main breaker and call an emergency electrician right away.
A burning smell means wires are overheating, connections are failing, or insulation is melting. This is exactly how electrical fires start in homes. Over 51,000 electrical fires happen every year in the U.S., causing more than $1.3 billion in property damage and hundreds of deaths. Most of those fires were preventable if someone had called an electrician when they first noticed the warning signs.
Emergency electrical repairs typically range from $200 to $500 depending on what’s wrong and what parts are needed. Panel upgrades run higher, usually between $1,500 and $3,000, because you’re replacing the entire electrical distribution system for your home.
EV charger installation costs vary based on whether your panel can handle the additional load and how far the charger is from your panel. If you need a panel upgrade first, that affects the total cost.
Here’s what matters more than the price: you’re paying for a licensed electrician who’s bonded and insured, who shows up when they say they will, and who fixes the problem correctly the first time. The cheapest electrician isn’t always the best value, especially when you’re dealing with something that could burn your house down if it’s done wrong. We give you upfront pricing before we start any work, so you know exactly what you’re paying for.
Chicago electrical code requires licensed electrical contractors for a reason. Electrical work involves serious safety risks, and mistakes kill people.
You’re working with enough voltage to stop your heart. You’re making connections that, if done incorrectly, will overheat and start a fire inside your walls where you can’t see it until it’s too late. You’re responsible for making sure the work is code-compliant, which affects your home insurance and resale value.
A licensed electrician carries liability insurance and workers compensation. If something goes wrong, you’re protected. If you do the work yourself and something goes wrong, your insurance company can deny your claim. They can also deny coverage for future electrical issues if they find out you did unpermitted electrical work. That’s not a risk worth taking to save a few hundred dollars.
If your electrical panel has capacity for an additional 240-volt circuit and the charger location is close to your panel, installation typically takes 3-4 hours. That includes running the circuit, mounting the charger, making all connections, and testing everything.
If your panel needs an upgrade first, add another day for the panel replacement. Most EV chargers require a 40-50 amp circuit, and older panels in Franklin Park homes often don’t have that capacity available.
The EV charging infrastructure market is growing fast. More Franklin Park homeowners are installing chargers now because it’s significantly cheaper than paying for public charging, and it’s more convenient than trying to find an available charger when you need one. We size the circuit correctly for your specific vehicle and charger model, install it to code, and make sure your panel can handle the load safely. This isn’t something you want done incorrectly, because an improperly installed EV charger can overload your system and create a serious fire hazard.
Circuit breakers are designed to trip when they detect too much current flowing through the circuit. They’re a safety device. When they trip, you flip them back on and you’re good to go. If they keep tripping, that’s telling you something’s wrong with that circuit or you’re overloading it.
Fuses do the same job, but they blow out and need to be replaced every time. If your home still has a fuse box instead of a breaker panel, you’re dealing with outdated technology that’s less safe and less convenient.
Here’s what most people don’t realize: a breaker that trips frequently isn’t doing its job wrong. It’s doing exactly what it’s supposed to do. It’s protecting your home from an overloaded circuit or a short circuit that could start a fire. The problem isn’t the breaker. The problem is whatever’s causing it to trip. That could be too many devices on one circuit, a failing appliance, damaged wiring, or a circuit that’s not sized correctly for what you’re using it for. A licensed electrician can diagnose the actual problem and fix it permanently.
Local Resources
