EV Charger Installation in Bartlett, IL

Charge at Home, Never Wait Again

Skip the public charging station lines and fuel up in your own driveway with professional EV charger installation in Bartlett, IL.

Hear from Our Customers

Professional EV Charger Installation Bartlett

Your EV Fully Charged Every Morning

Picture this: you plug in your electric vehicle before bed and wake up to a full battery every single morning. No more hunting for available charging stations or sitting in parking lots for an hour waiting for your car to charge.

Level 2 home charging stations give you a complete charge in 10 hours or less, turning your garage into your personal fuel station. You’ll save around $1,000 yearly on fuel costs while charging safely in your own driveway instead of exposing yourself to the risks of public charging areas.

The convenience alone changes everything. Your time becomes your own again, and your electric vehicle becomes truly practical for daily life in Bartlett.

Licensed EV Charger Installer Bartlett

25 Years Solving Electrical Problems Right

We’ve been handling residential electrical emergencies in Bartlett for 25 years. We’ve seen every type of electrical issue homeowners face, from flickering lights to complete power outages to burning smells that need immediate attention.

This experience matters when you’re adding a major electrical load like an EV charger to your home. We know how to evaluate your existing electrical system, determine if your panel can handle the additional demand, and install your charging station safely and to code.

Licensed, bonded, and insured, we specialize in the kind of urgent electrical work that can’t wait. When you need your EV charger installed correctly the first time, you want electricians who understand how electrical systems actually work under stress.

Home EV Charger Installation Process

Simple Installation, Professional Results

Your EV charger installation starts with an electrical system evaluation. We inspect your current panel, check your available capacity, and determine exactly what’s needed to safely power your Level 2 charging station.

Next comes the installation itself. This typically involves running a dedicated 240-volt circuit from your electrical panel to your chosen charging location, whether that’s your garage, driveway, or carport. We handle all the electrical work, conduit installation, and proper grounding.

Finally, we test everything to ensure your charger operates safely and efficiently. You’ll get a walkthrough of how to use your new charging station, plus we’ll help you understand how to take advantage of ComEd’s time-of-use rates to charge for less money during off-peak hours.

The whole process usually takes one day, depending on the complexity of your electrical setup and the distance from your panel to the charging location.

Ready to get started?

Explore More Services

About Jimco Electric

Get a Free Consultation

Residential EV Charging Station Installation

What You Get With Professional Installation

Your EV charger installation includes everything needed for safe, code-compliant operation. This means a dedicated 240-volt circuit, proper GFCI protection, and installation that meets all local electrical codes and manufacturer specifications.

In Bartlett, many homes built before 2010 need electrical panel upgrades to handle the additional load of an EV charger. If your panel needs upgrading, we can handle that too, ensuring your entire electrical system is ready for your electric vehicle and any future electrical needs.

You’ll also get help navigating ComEd’s rebate program, which offers up to $2,000 back for EV charger installations. Combined with the federal tax credit of up to $1,000, these incentives can significantly reduce your out-of-pocket costs.

We install all major brands of Level 2 charging stations and can recommend the best option based on your specific vehicle and charging needs. Installation includes permits, inspections, and a warranty on all electrical work.

How much does EV charger installation cost in Bartlett, IL?

EV charger installation costs in Bartlett typically range from $500 to $2,000, depending on your home’s electrical setup and the distance from your panel to the charging location. Simple installations that only require a 240-volt outlet might cost around $500, while more complex jobs requiring new electrical circuits or panel upgrades can cost $1,000 to $2,000. However, ComEd offers rebates up to $2,000 for EV charger installations, which can cover most or all of your installation costs. You can also claim a federal tax credit of 30% of the total cost, up to $1,000. These incentives make home EV charging much more affordable for Bartlett residents. The exact cost depends on factors like your current electrical panel capacity, the type of charger you choose, and whether any electrical upgrades are needed. We provide upfront pricing so you know exactly what to expect before any work begins.

Do I need a permit for EV charger installation in Bartlett?

Yes, you need a permit for EV charger installation in Bartlett, IL. Any electrical work involving a new 240-volt circuit requires a permit and inspection to ensure the installation meets local electrical codes and safety standards. The permit process involves submitting electrical plans showing the circuit routing, load calculations, and equipment specifications. After installation, a city inspector will verify that the work was completed properly and safely. This inspection is required before your charger can be legally energized. We handle the permit application and inspection process as part of our service. We know exactly what Bartlett’s electrical inspectors look for and ensure your installation passes inspection the first time. Trying to skip the permit process can create safety hazards and problems if you ever sell your home.

What's the difference between Level 1 and Level 2 EV charging?

Level 1 charging uses a standard 120-volt household outlet and can take 24 hours or more to fully charge an electric vehicle. It’s the slowest charging method and typically only adds 3-5 miles of range per hour of charging. Most EV owners find Level 1 charging too slow for daily use. Level 2 charging uses a 240-volt circuit, similar to what powers your electric dryer or oven. It charges 6-8 times faster than Level 1, typically providing a full charge in 10 hours or less. Level 2 chargers add 25-40 miles of range per hour of charging, making them practical for daily use. For Bartlett residents, Level 2 charging is almost always the better choice. You can plug in when you get home and have a full battery by morning. The faster charging speed means you’re never stuck waiting for your car to charge, and you can take advantage of ComEd’s lower off-peak electricity rates by charging overnight.

Can my electrical panel handle an EV charger installation?

Most homes in Bartlett built after 2000 have 200-amp electrical panels that can handle an EV charger installation. However, older homes with 100-amp panels or panels that are already heavily loaded might need upgrades before adding an EV charger. An EV charger typically requires a 40-50 amp dedicated circuit, which is a significant electrical load. During the initial evaluation, we’ll check your panel’s available capacity, examine your current electrical usage, and determine if any upgrades are needed. This load calculation is crucial for safe operation. If your panel needs upgrading, we can handle that work too. A panel upgrade ensures your entire electrical system is ready for your EV charger and any future electrical needs. Many Bartlett homeowners find that upgrading their electrical panel is a worthwhile investment that increases their home’s value and safety.

How long does EV charger installation take in Bartlett?

Most EV charger installations in Bartlett take one full day to complete, assuming no major electrical upgrades are needed. This includes running the new circuit from your electrical panel to the charging location, installing the charger, and completing all electrical connections. If your electrical panel needs upgrading or the installation is particularly complex, the work might take two days. Factors that can extend the timeline include long distances from the panel to the charging location, the need to run conduit through finished walls, or required electrical panel upgrades. The permit and inspection process adds a few days to the overall timeline but doesn’t affect the actual installation work. We coordinate with the city to schedule inspections promptly, ensuring your charger is approved and ready to use as quickly as possible. Weather can also affect outdoor installation work, but most of the electrical work happens indoors or in covered areas.

What ComEd rebates are available for EV charger installation?

ComEd offers rebates up to $2,000 for residential EV charger installations in Bartlett, starting June 1, 2025. This rebate can cover most or all of your installation costs, making home EV charging much more affordable. The rebate applies to both the charger equipment and installation labor. To qualify for the ComEd rebate, you must install a Level 2 charger and enroll in ComEd’s hourly pricing program for three years. The rebate is available on a first-come, first-served basis, so applying early is important. Last year’s rebate program ran out of funding, so don’t wait if you’re considering EV charger installation. You can also combine the ComEd rebate with the federal tax credit, which provides 30% of your total costs up to $1,000. Together, these incentives can significantly reduce your out-of-pocket expenses. We can help you navigate the rebate application process and ensure you receive all available incentives.

Local Resources

Bartlett, IL is located in Cook County in Illinois State