EV Charger Installation in Frankfort Square, IL

Get Your EV Charger Installed Right

Professional EV charger installation that meets code, maximizes rebates, and gets you charging safely at home.

An electrician in Cook and Will County uses wire strippers with red handles to remove insulation from electrical wires, exposing copper cores in a bundle of black, blue, and green wires.

Hear from Our Customers

An electrician Cook and Will County in a helmet and safety vest uses a laptop to monitor or control wall-mounted electrical equipment and a charging station in a modern facility with large windows.

Home EV Charger Installation Frankfort Square

Charge at Home, Save Every Month

Your EV charger installation opens up serious savings. With ComEd rebates covering up to $3,750 of your installation costs, you’re already ahead. Then there’s the ongoing savings – charge during off-peak hours for as little as $0.02 per kWh instead of paying premium rates at public stations.

Beyond the money, you get convenience. No more planning trips around charging stops or waiting in line at public stations. Plug in when you get home, wake up to a full charge. Your property value increases too – homes with EV charging infrastructure are becoming the standard buyers expect.

The installation process handles all the technical details you shouldn’t have to worry about. Permits, electrical code compliance, circuit capacity analysis – it’s all covered by professionals who’ve been doing electrical work in Frankfort Square for 25 years.

Licensed EV Charger Installer Frankfort Square

25 Years Solving Electrical Problems

We’ve been handling residential electrical emergencies and upgrades in the Frankfort Square area since 1999. When your power goes out, circuits fail, or you smell something burning, you need someone who shows up fast and fixes it right the first time.

That same reliability applies to our EV charger installations. The electrical expertise that handles emergency panel upgrades and circuit additions translates directly to safe, code-compliant EV charging solutions. Licensed, bonded, and insured means your investment is protected.

Frankfort Square homeowners choose us because we understand the local electrical infrastructure and building requirements. We’re not a national chain – we’re your neighbors who’ve been keeping the lights on in this community for over two decades.

An electrician Cook and Will County, IL, wearing a safety vest and helmet, uses a multimeter to check wiring inside an electrical panel mounted on a white wall next to a large white device.

Residential EV Charger Installation Process

Simple Process, Professional Results

Your EV charger installation starts with our electrical assessment of your current system. We check your panel capacity, existing circuits, and determine what upgrades might be needed. Most Frankfort Square homes built in the 1980s and later can handle Level 2 charging with minimal modifications.

Next comes permit applications and utility coordination. We handle the paperwork with Will County and coordinate with ComEd for any utility requirements. This includes applying for available rebates – currently up to $3,750 for qualifying installations.

Installation day involves running the dedicated circuit from your electrical panel to the charging location. We mount the charging station, make all electrical connections, and test the system thoroughly. Final inspection ensures everything meets code requirements. You’re typically charging the same day we finish the installation.

An electrician working on wiring in a residential home in Cook & Will County, IL. The electrician is wearing safety gear, including gloves and a helmet, while handling electrical components inside a circuit panel.

Ready to get started?

Explore More Services

About Jimco Electric

Get a Free Consultation

Professional EV Charger Installation Services

Complete Installation and Electrical Upgrades

Your EV charger installation includes everything needed for safe, reliable home charging. We install Level 2 charging stations that deliver 240-volt power for faster charging than standard outlets. Most installations complete overnight charging for typical daily driving needs.

Electrical upgrades happen when needed. Panel upgrades, circuit additions, and service changes are part of our regular residential work. Frankfort Square homes typically need 40-50 amp dedicated circuits for optimal EV charging performance.

Local building codes require permits for electrical work, and we handle the entire process. Will County inspections ensure your installation meets safety standards. We submit ComEd rebate applications with proper documentation to maximize your savings. Military, first responders, seniors, teachers, and students receive additional discounts on top of utility rebates.

A person in a blue shirt installs or services an electric vehicle (EV) charging station on a white wall, with an electrical panel open and wires visible—professional Electrical Services Cook and Will County, IL.

How much does EV charger installation cost in Frankfort Square?

EV charger installation costs vary based on your electrical system and chosen charging station. Basic installations with existing 240-volt service typically run $500-800 for labor. Installations requiring new circuits or panel upgrades range from $1,200-2,500 total. ComEd rebates significantly reduce these costs. Current rebates cover $1,000-3,750 of installation expenses, with higher rebates for qualifying low-income households. After rebates, many homeowners pay $500 or less out of pocket for complete Level 2 charging setup. We provide upfront pricing after assessing your electrical system. No surprises or hidden fees – you know exactly what you’ll pay before we start work.
Most Frankfort Square homes need a dedicated 240-volt circuit for Level 2 EV charging. Homes built since 1980 typically have adequate panel capacity for this addition. Older homes might require panel upgrades to handle the additional electrical load safely. Circuit requirements depend on your chosen charging station. Most residential chargers need 40-50 amp circuits, similar to electric dryer installations. We assess your current electrical system and recommend only necessary upgrades – no overselling equipment you don’t need. Panel locations matter too. Garages attached to homes usually allow shorter wire runs and lower installation costs. Detached garages or outdoor installations require longer circuits but remain completely feasible with proper planning.
Most EV charger installations complete in 4-6 hours for straightforward setups. This includes mounting the charging station, running the dedicated circuit, making electrical connections, and testing the system. You’re typically charging your vehicle the same day. Installations requiring electrical upgrades take longer. Panel upgrades add 2-4 hours depending on complexity. New circuit installations through finished spaces require additional time for wire routing and wall repairs. Permit inspections happen after installation completion. We schedule inspections with Will County and coordinate timing to minimize delays. Most inspections occur within 2-3 business days of installation completion.
Attached garages work perfectly for EV charger installations. Most Frankfort Square homes have electrical panels located near attached garages, making circuit installation straightforward and cost-effective. Shorter wire runs mean lower material costs and faster installation times. Garage installations require proper mounting to structural elements and adequate clearance around the charging station. We ensure installations meet manufacturer specifications and local building codes. GFCI protection and proper grounding provide safety for garage environments. Weather protection isn’t typically needed for garage installations, but we recommend choosing charging stations rated for garage conditions. Dust, temperature variations, and occasional moisture require appropriate equipment selection for long-term reliability.
ComEd offers the largest rebates for EV charger installation in Frankfort Square. Current rebates range from $1,000-3,750 depending on your charging station and household income qualification. Higher rebates apply to households participating in public assistance programs. City of Naperville residents can stack additional $500 rebates on top of ComEd incentives. Building permits are required for rebate qualification, and we handle all necessary paperwork and applications as part of our installation service. Federal tax credits may also apply to EV charger installations. The residential clean energy credit covers 30% of installation costs through 2032, then decreases to 26% in 2033. We provide documentation needed for tax credit applications.
Yes, EV charger installations require electrical permits in Will County. Any work involving new circuits, electrical connections, or panel modifications needs permit approval and inspection. This ensures installations meet safety codes and qualify for utility rebates. We handle all permit applications and inspections as part of our installation service. Permit costs are typically $50-150 depending on work scope. Inspection scheduling happens after installation completion, usually within 2-3 business days. Skipping permits creates problems with insurance claims, home sales, and utility rebates. Proper permitting protects your investment and ensures safe, code-compliant installation that adds value to your home rather than creating liabilities.