EV Charger Installation in Hinsdale, IL

Charge at Home, Drive With Confidence

Professional electric vehicle charger installation that lets you skip public charging stations and wake up to a fully charged EV every morning.

An electrician in Cook and Will County uses wire strippers with red handles to remove insulation from electrical wires, exposing copper cores in a bundle of black, blue, and green wires.

Hear from Our Customers

An electrician Cook and Will County in a helmet and safety vest uses a laptop to monitor or control wall-mounted electrical equipment and a charging station in a modern facility with large windows.

Professional EV Charger Installation Hinsdale

Your Garage Becomes Your Gas Station

No more hunting for charging stations. No more sitting in parking lots waiting for your battery to fill up. No more paying premium rates at public chargers.

Your home EV charger means you control when and where you charge. Plug in when you get home from work, and you’ll have maximum range every morning. The convenience changes everything about electric vehicle ownership.

You’ll save money too. Home electricity rates are significantly lower than public charging stations, and Illinois utilities offer special time-of-use rates that make overnight EV charging even more affordable. Many Hinsdale residents cut their charging costs by 60% or more compared to public stations.

Licensed EV Charger Installer Hinsdale IL

25 Years Handling Hinsdale Electrical Emergencies

We’ve been the go-to electrical contractor for Hinsdale homeowners since the late 1990s. We’ve handled everything from emergency panel repairs to complete electrical upgrades in homes throughout the area.

EV charger installation is a natural extension of what we already do. Most installations require new dedicated circuits or panel upgrades – exactly the type of residential electrical work we’ve been doing for over two decades. We know Hinsdale’s building codes, the permit process with the Village, and how to safely add high-amperage circuits to your home.

We’re licensed, bonded, and insured electrical contractors. When your neighbors have electrical emergencies – flickering lights, burning smells, or power outages – they call us. Now they’re calling us for EV charger installations too.

An electrician Cook and Will County, IL, wearing a safety vest and helmet, uses a multimeter to check wiring inside an electrical panel mounted on a white wall next to a large white device.

EV Charging Station Installation Process Hinsdale

Straightforward Process, Professional Installation

We start with an electrical assessment of your home. Most EV chargers need a dedicated 240-volt circuit, so we’ll evaluate your electrical panel capacity and determine the best charging location. If your panel needs upgrading, we’ll explain what’s involved.

Permits come next. The Village of Hinsdale requires electrical permits for EV charger installations, and we handle the entire application process. Permits typically take 3-5 business days to approve, and we schedule your installation once everything’s ready.

Installation day is straightforward. We run the new circuit from your panel to your chosen location, mount your charging station, and connect everything according to manufacturer specifications. We test the entire system before we leave. You’ll be charging your EV that same day, and we coordinate the required Village inspection within 24 hours.

An electrician working on wiring in a residential home in Cook & Will County, IL. The electrician is wearing safety gear, including gloves and a helmet, while handling electrical components inside a circuit panel.

Ready to get started?

Explore More Services

About Jimco Electric

Get a Free Consultation

Residential EV Charger Installation Services Hinsdale

Complete Installation With Maximum Rebates

Your installation includes everything needed for safe, reliable home EV charging. We install Level 2 charging stations that charge 6-8 times faster than standard wall outlets. Most electric vehicles charge completely overnight with Level 2 home chargers.

Hinsdale residents have access to substantial rebates that often cover the entire installation cost. ComEd customers can receive up to $3,750 for Level 2 charger installation, plus federal tax credits cover 30% of costs up to $1,000. These rebates make professional EV charger installation surprisingly affordable.

We handle permit applications, coordinate Village inspections, and provide all documentation you need for rebate applications. Our installations meet ICC certification requirements and all local electrical codes. You’ll receive warranty information and operating instructions for your new charging station.

A person in a blue shirt installs or services an electric vehicle (EV) charging station on a white wall, with an electrical panel open and wires visible—professional Electrical Services Cook and Will County, IL.

How Much Does Home EV Charger Installation Cost in Hinsdale?

EV charger installation in Hinsdale typically costs $1,200-$2,500 depending on your electrical panel capacity and charging location. However, available rebates often reduce your actual cost to zero.ComEd offers rebates up to $3,750 for Level 2 charger installation, which frequently covers the entire project cost. Federal tax credits provide an additional 30% credit up to $1,000. Combined, these incentives make professional EV charger installation extremely affordable for Hinsdale homeowners.The Village of Hinsdale requires electrical permits with a minimum $290 fee. We include permit applications and inspection coordination in our installation service, so you don’t need to navigate the bureaucracy yourself.
Many Hinsdale homes can support EV charger installation without panel upgrades, but it depends on your current electrical capacity. Level 2 EV chargers typically require a dedicated 240-volt, 40-amp circuit.We perform a thorough electrical assessment during our consultation to determine your panel’s available capacity. Homes built after 2000 usually have adequate electrical service for EV charging. Older homes may need panel upgrades to safely handle the additional electrical load.Panel upgrades also qualify for rebates and improve your home’s overall electrical capacity. If an upgrade is necessary, we handle permits, installation, and inspections as part of a complete electrical service upgrade.
Most EV charger installations take 4-6 hours once permits are approved and materials arrive. The timeline depends on your installation complexity and whether electrical panel work is needed.Village of Hinsdale permit approval typically takes 3-5 business days. We schedule installation once permits are ready and coordinate the required electrical inspection, which must be scheduled 24 hours in advance with Village officials.Installations requiring panel upgrades may take a full day, but you’ll be charging your EV immediately after we complete the work and pass inspection. We don’t leave until your charging station is fully operational.
Level 2 charging stations are ideal for home EV charger installation in Hinsdale. These 240-volt chargers provide 25-40 miles of range per charging hour, meaning overnight charging gives you maximum range every morning.Level 2 chargers are required for ComEd’s rebate program and are 6-8 times faster than standard wall outlets. They’re also “smart” chargers that can automatically charge during off-peak hours when electricity rates are lowest.We recommend ENERGY STAR and NRTL certified charging stations that meet all rebate requirements and provide years of reliable service. These chargers integrate with time-of-use electricity rates to minimize your charging costs.
Illinois offers some of the nation’s most generous EV charger rebates. ComEd customers receive $1,000-$3,750 rebates for Level 2 charger installation, with maximum rebates available for customers qualifying for public assistance programs.Federal tax credits provide 30% of installation costs up to $1,000. Combined with ComEd rebates, these incentives often cover your entire EV charger installation cost, making home charging essentially free.We help you navigate rebate applications and provide all required documentation. Rebates apply to smart, ENERGY STAR certified Level 2 chargers installed according to manufacturer specifications and local electrical codes.
Yes, we manage all permit applications and inspection coordination with the Village of Hinsdale. EV charger installations require electrical permits with a minimum $290 fee, and we include permit handling in our installation service.Village inspections are performed by code professionals and must be scheduled 24 hours in advance. We coordinate inspection timing and ensure all work meets local electrical codes before the inspector arrives.Our installations comply with ICC certification requirements and Illinois electrical standards. We provide inspection certificates and documentation needed for rebate applications and warranty coverage.