EV Charger Installation in Midlothian, IL

Wake Up to a Full Battery Every Morning

Professional EV charger installation that eliminates range anxiety and saves you money with current rebates up to $2,000.

An electrician in Cook and Will County uses wire strippers with red handles to remove insulation from electrical wires, exposing copper cores in a bundle of black, blue, and green wires.

Hear from Our Customers

An electrician Cook and Will County in a helmet and safety vest uses a laptop to monitor or control wall-mounted electrical equipment and a charging station in a modern facility with large windows.

Home EV Charger Installation Midlothian

Charge 6x Faster Than Your Wall Outlet

You’re tired of hunting for public charging stations and waiting around while your car charges. With a Level 2 home charger, you plug in when you get home and wake up ready to go.

Your EV charges 6 to 8 times faster than a standard wall outlet. Most electric vehicles reach full charge overnight, giving you 200+ miles of range by morning. No more planning trips around charging stops or sitting in parking lots.

The real benefit? You’re charging at home electricity rates instead of paying premium prices at public stations. Over time, that adds up to serious savings on your transportation costs.

Licensed EV Charger Installer Midlothian

25 Years Solving Electrical Problems in Midlothian

We’ve been handling residential electrical work in the Midlothian area for over 25 years. Our specialty is emergency electrical repairs, but that experience makes us particularly good at EV charger installations.

When you’re adding a 240-volt circuit to your home, you want someone who understands electrical panels, knows local codes, and has dealt with every type of electrical challenge. We’re licensed, bonded, and insured.

Midlothian homeowners choose us because we understand the area’s electrical infrastructure. Many homes here were built in the 1960s, and we know how to work with older electrical systems while bringing them up to current code for EV charging.

An electrician Cook and Will County, IL, wearing a safety vest and helmet, uses a multimeter to check wiring inside an electrical panel mounted on a white wall next to a large white device.

Professional EV Charger Installation Process

Simple Process, Professional Results

First, we assess your electrical panel and determine if it can handle the additional load. Most Level 2 chargers require a dedicated 240-volt circuit, similar to what powers your dryer or electric stove.

If your panel needs an upgrade, we handle that too. We’ve been doing panel upgrades and service changes for 25 years, so this is routine work for us. We pull all necessary permits and ensure everything meets Cook County electrical codes.

Installation typically takes 4-6 hours depending on the distance from your panel to where you want the charger mounted. We mount the charging unit, run the wiring, connect everything safely, and test the system before we leave. You’ll have a fully functional Level 2 charger ready to use that same day.

An electrician working on wiring in a residential home in Cook & Will County, IL. The electrician is wearing safety gear, including gloves and a helmet, while handling electrical components inside a circuit panel.

Ready to get started?

Explore More Services

About Jimco Electric

Get a Free Consultation

Residential EV Charger Installation Midlothian

Complete Installation With Current Rebates

Right now, Midlothian residents can get up to $2,000 from ComEd’s rebate program for Level 2 EV charger installation. Combined with the federal tax credit of up to $1,000, you could cover most or all of your installation costs.

We handle the electrical work, permits, and help you navigate the rebate process. The ComEd rebate covers both equipment and labor costs, and since a typical installation runs around $2,000, many homeowners pay nothing out of pocket.

Cook County has specific requirements for EV charger installations, including proper permitting and inspections. We know these requirements inside and out. Plus, we offer discounts for military personnel, first responders, seniors, teachers, and students because we believe everyone should have access to clean transportation options.

A person in a blue shirt installs or services an electric vehicle (EV) charging station on a white wall, with an electrical panel open and wires visible—professional Electrical Services Cook and Will County, IL.

How much does EV charger installation cost in Midlothian, IL?

A typical Level 2 EV charger installation in Midlothian costs between $1,500 and $2,500, depending on the distance from your electrical panel to the installation location. However, with current rebates, many homeowners pay nothing out of pocket.ComEd is offering $2,000 rebates for installations completed after June 1, 2025. You can also claim a federal tax credit for 30% of the total cost, up to $1,000. When you combine these incentives, most standard installations are completely covered.The final cost depends on whether your electrical panel needs upgrading and how much wiring is required. We provide free estimates so you know exactly what to expect before we start any work.
Not necessarily, but it depends on your current panel capacity and what’s already connected to it. Level 2 EV chargers typically require a 40-amp or 50-amp dedicated circuit, which draws about the same power as an electric dryer.We start every installation with a load calculation to determine if your panel can handle the additional demand. Many homes in Midlothian were built in the 1960s with 100-amp or 150-amp panels. If you have central air, electric heat, and other high-draw appliances, you might need an upgrade to 200 amps.Panel upgrades are routine work for us. We’ve been doing them for 25 years, and we handle all the permitting and inspection requirements. The ComEd rebate covers panel upgrade costs when they’re necessary for EV charger installation.
Most EV charger installations take 4 to 6 hours to complete. This includes mounting the charging unit, running the electrical wiring, connecting everything to your panel, and testing the system.If your electrical panel needs upgrading, add another 2 to 4 hours to the timeline. We typically complete panel upgrades and charger installation in the same day, so you’re not without power overnight.The timeline can extend if we need to run wiring through finished walls or if there are complications with your existing electrical system. But after 25 years of residential electrical work, we’ve seen most situations and can usually predict the timeline accurately during our initial assessment.
Cook County requires an electrical permit for Level 2 EV charger installation because you’re adding a new 240-volt circuit to your home. We handle all permit applications and scheduling of required inspections.The permit process typically takes 2-3 business days. We submit the application with detailed installation plans showing the charger location, electrical routing, and panel connections. Once approved, we schedule the installation.After installation, a county inspector verifies that everything meets electrical code requirements. We coordinate this inspection and handle any follow-up if adjustments are needed. The permit and inspection costs are included in our installation price, and they’re covered by the current ComEd rebate program.
EV charger installation requires a licensed electrician in Cook County. This isn’t a DIY project because you’re working with 240-volt electrical circuits and modifying your home’s electrical panel.Beyond the legal requirements, there are safety considerations. Improper installation can cause electrical fires, damage your vehicle’s charging system, or create shock hazards. Insurance companies may not cover damage from unlicensed electrical work.The current rebate situation actually makes professional installation very affordable. With up to $2,000 from ComEd plus federal tax credits, most homeowners pay little or nothing for professional installation. When you factor in the safety, warranty, and code compliance benefits, professional installation is the smart choice.
We typically recommend Level 2 chargers from established manufacturers like ChargePoint, JuiceBox, or Wallbox. These brands offer reliable performance, good warranties, and smart features like scheduling and usage monitoring.The specific charger depends on your vehicle and charging needs. Tesla owners can use Tesla Wall Connectors or universal J1772 chargers with an adapter. Most other EVs use the standard J1772 connector.We focus on chargers that are ENERGY STAR certified and meet ComEd’s rebate requirements. Smart chargers let you schedule charging during off-peak hours when electricity rates are lower. We help you choose the right charger during our consultation and include it in your total installation cost covered by available rebates.