EV Charger Installation in Northlake, IL

Wake Up to a Fully Charged Car

Stop wasting time and money at public charging stations. Professional EV charger installation in Northlake, IL gets you charging at home overnight.

An electrician in Cook and Will County uses wire strippers with red handles to remove insulation from electrical wires, exposing copper cores in a bundle of black, blue, and green wires.

Hear from Our Customers

An electrician Cook and Will County in a helmet and safety vest uses a laptop to monitor or control wall-mounted electrical equipment and a charging station in a modern facility with large windows.

Home EV Charging Solutions Northlake

Never Hunt for Charging Again

Your garage becomes your personal fuel station. Plug in when you get home, wake up to 200+ miles of range every morning. No more planning trips around charging stations or sitting in your car for 45 minutes at the grocery store.

With only 2 public charging ports within 15 kilometers of Northlake, home charging isn’t just convenient—it’s essential. You’ll save $10-30 every time you charge compared to public stations, and that adds up fast when you’re driving daily.

The peace of mind is worth it alone. No more range anxiety during Illinois winters when cold weather cuts your battery life. Your EV charger works when you need it, where you need it.

Licensed EV Installer Northlake IL

25 Years Solving Electrical Problems

We’ve been the go-to electrical service for Northlake homeowners for 25 years. We specialize in residential electrical work, from emergency repairs to major installations like EV chargers.

We’re licensed, bonded, and insured with Illinois Commerce Commission certification for EV charger installation. This isn’t our first rodeo with high-voltage electrical work—we’ve been handling everything from panel upgrades to new circuits for decades.

What sets us apart is our focus on residential customers. We understand that Northlake homeowners want reliable service without the runaround. We offer discounts for military, first responders, seniors, teachers, students, and new customers because we believe everyone deserves quality electrical work.

An electrician Cook and Will County, IL, wearing a safety vest and helmet, uses a multimeter to check wiring inside an electrical panel mounted on a white wall next to a large white device.

EV Charger Installation Process Northlake

Simple Installation, Professional Results

The process starts with a site assessment of your electrical panel and garage. We’ll determine if you need a new 240-volt circuit or if your existing electrical system can handle the load. Most Northlake homes built after 1960 have sufficient electrical capacity, but older homes may need a panel upgrade.

Next, we’ll run the appropriate wiring from your electrical panel to your garage or carport. The installation includes mounting the charging station, connecting the electrical circuit, and testing everything to ensure it’s working properly. We pull all necessary permits and handle the inspection process.

The final step is programming your charger and showing you how to use it. Most installations take 3-6 hours depending on the distance from your panel to the charging location. You’ll be charging your EV the same day in most cases.

An electrician working on wiring in a residential home in Cook & Will County, IL. The electrician is wearing safety gear, including gloves and a helmet, while handling electrical components inside a circuit panel.

Ready to get started?

Explore More Services

About Jimco Electric

Get a Free Consultation

Residential EV Charger Installation Northlake

Level 2 Charging for Northlake Homes

Level 2 charging stations are the sweet spot for Northlake homeowners. They provide about 25 miles of range per hour of charging, meaning most EVs will fully charge overnight. This is perfect for the typical Northlake commute to Chicago or around the western suburbs.

The installation includes a dedicated 240-volt circuit, professional mounting, and connection to your home’s electrical system. We work with all major charger brands and can install both hardwired and plug-in units depending on your preference and local code requirements.

Illinois residents can take advantage of ComEd rebates ranging from $1,000 to $3,750 for EV charger installation. There’s also a federal tax credit of up to $1,000 for residential installations. With Northlake’s median household income of $77,564, these incentives make home charging stations very affordable for most families.

A person in a blue shirt installs or services an electric vehicle (EV) charging station on a white wall, with an electrical panel open and wires visible—professional Electrical Services Cook and Will County, IL.

How much does EV charger installation cost in Northlake, IL?

Installation costs typically range from $800 to $2,000 depending on your home’s electrical setup and the distance from your panel to the charging location. If you need a new 240-volt circuit, expect to pay around $1,000-$1,500 for the complete installation. Homes with older electrical panels may need upgrades, which can add $1,000-$3,000 to the project. However, ComEd offers rebates up to $3,750 for qualifying installations, and there’s a federal tax credit of up to $1,000. These incentives often cover most or all of the installation cost. The investment pays for itself quickly when you consider that public charging costs $10-30 per session. Most Northlake EV owners save $100-200 per month by charging at home instead of using public stations.
Level 2 EV chargers require a dedicated 240-volt circuit, similar to what powers your electric dryer or water heater. Most installations use a 40-amp or 50-amp circuit, though some high-powered chargers may require 60 amps or more. Your electrical panel needs sufficient capacity to handle the additional load. Most Northlake homes built after 1960 have 100-amp or 200-amp panels that can accommodate EV charging. However, if your panel is already at capacity or you have an older 60-amp service, you may need an electrical upgrade. The installation must be performed by a licensed electrician and requires permits from the city. Illinois also requires that EV charger installers be certified by the Illinois Commerce Commission. All of this is handled as part of our professional installation process.
With a Level 2 home charger, most electric vehicles will fully charge in 4-8 hours. This means you can plug in when you get home from work and have a full battery by morning. The exact time depends on your vehicle’s battery size and how much charge it needs. For example, a Tesla Model 3 with a 75 kWh battery will charge from empty to full in about 6 hours on a 40-amp Level 2 charger. A Nissan Leaf with a smaller 40 kWh battery charges completely in about 3 hours. Most people never fully deplete their battery, so typical overnight charging adds 150-200 miles of range. This is much faster than Level 1 charging using a standard 120-volt outlet, which only adds about 4-5 miles of range per hour. Level 1 charging might work if you drive less than 40 miles per day, but most Northlake residents find Level 2 charging essential for daily use.
Yes, EV charger installation requires an electrical permit from the City of Northlake. This is because the installation involves adding a new 240-volt circuit to your home’s electrical system, which is considered major electrical work under local building codes. The permit process typically takes 1-2 weeks and costs around $50-100. We handle pulling the permit and scheduling the required inspection. The city inspector will verify that the installation meets electrical codes and safety standards before approving the work. Some homeowners try to skip the permit process, but this is risky. Unpermitted electrical work can void your homeowner’s insurance, create safety hazards, and cause problems when you sell your home. Professional installation with proper permits protects your investment and ensures everything is done safely.
Yes, EV chargers can be installed in detached garages, though the installation is more complex than attached garage installations. The main challenge is running electrical wiring from your home’s electrical panel to the detached structure, which may require trenching underground conduit. The electrical code requires that underground wiring be buried at least 18 inches deep in conduit for protection. The distance from your home to the garage affects both the cost and complexity of the installation. Runs over 100 feet may require larger wire sizes to compensate for voltage drop. Most Northlake properties with detached garages can accommodate EV charger installation, but the cost is typically $500-1,500 higher than attached garage installations. The good news is that ComEd rebates and federal tax credits apply to detached garage installations just like any other residential EV charger installation.
ComEd offers the most generous rebates for Northlake residents, ranging from $1,000 to $3,750 depending on your income level. Standard rebates are $1,000 for most homeowners, while those qualifying for public assistance programs can receive up to $3,750. The rebate covers both the charger and installation costs. There’s also a federal tax credit of up to $1,000 for residential EV charger installations under the Inflation Reduction Act. This credit applies to both the equipment and installation costs, and you can claim it when filing your tax return. Unlike rebates, tax credits reduce your tax liability dollar-for-dollar. The City of Northlake doesn’t currently offer local rebates, but the state of Illinois provides up to $4,000 rebates for EV purchases through April 2025. Combined with federal and utility incentives, these programs make both EV ownership and home charging very affordable for Northlake families.