EV Charger Installation in Palos Park, IL

Charge at Home, Skip the Hunt

Professional EV charger installation that puts convenience in your garage and money back in your pocket.

An electrician in Cook and Will County uses wire strippers with red handles to remove insulation from electrical wires, exposing copper cores in a bundle of black, blue, and green wires.

Hear from Our Customers

An electrician Cook and Will County in a helmet and safety vest uses a laptop to monitor or control wall-mounted electrical equipment and a charging station in a modern facility with large windows.

Professional EV Charger Installation Palos Park

Wake Up to a Fully Charged Car

You bought an electric vehicle for good reasons. Lower emissions, quieter rides, and long-term savings on fuel. But charging at public stations? That’s where the convenience stops.

Home EV charger installation changes everything. No more planning your day around charging station locations. No more waiting in line behind other drivers. No more paying premium rates for public charging when you could be using cheaper overnight electricity rates at home.

With a Level 2 charger in your garage, you plug in when you get home and wake up to a fully charged vehicle every morning. It’s that simple. Your car charges while you sleep, using off-peak electricity that costs significantly less than daytime rates.

Licensed EV Charger Installer Palos Park

25 Years Solving Electrical Problems Right

We’ve spent 25 years handling the electrical issues that matter most to Palos Park homeowners. Flickering lights, power outages, burning smells, panel upgrades – we’ve seen it all and fixed it all.

We’re licensed, bonded, and insured because your safety isn’t negotiable. Our focus on emergency electrical repairs means we understand how to work quickly without cutting corners. When you’re adding a high-powered appliance like an EV charger to your home’s electrical system, that experience matters.

Palos Park homeowners choose us because we show up when we say we will, diagnose problems accurately, and explain exactly what needs to happen before we start work. No surprises, no runarounds, just professional electrical service that gets your EV charger installed safely and up to code.

An electrician Cook and Will County, IL, wearing a safety vest and helmet, uses a multimeter to check wiring inside an electrical panel mounted on a white wall next to a large white device.

Home EV Charger Installation Process

From Assessment to Charging in Days

Every EV charger installation starts with understanding your home’s electrical capacity. We perform a comprehensive load calculation to determine if your current panel can handle the additional 240-volt circuit your Level 2 charger requires. Many homes built before 2000 need panel upgrades, and we’ll tell you upfront if that’s the case.

Next comes the permit process. Palos Park requires permits for EV charger installations, and we handle all the paperwork. We know exactly what the local inspectors look for and ensure your installation meets or exceeds all safety codes.

The actual installation involves running a dedicated 240-volt circuit from your electrical panel to your chosen charging location. We’ll mount your charger securely, connect it properly, and test everything thoroughly before we consider the job complete. Most installations take one day, though panel upgrades may require a second visit.

An electrician working on wiring in a residential home in Cook & Will County, IL. The electrician is wearing safety gear, including gloves and a helmet, while handling electrical components inside a circuit panel.

Ready to get started?

Explore More Services

About Jimco Electric

Get a Free Consultation

Residential EV Charger Installation Services

Everything You Need for Home Charging

Your EV charger installation includes more than just mounting hardware on your garage wall. We provide complete electrical service from start to finish, including load calculations, permit applications, circuit installation, and final testing.

Palos Park homeowners benefit from Illinois’ generous rebate programs. ComEd customers can receive up to $3,750 in rebates for Level 2 charger purchase and installation. The Illinois Environmental Protection Agency offers additional rebates worth up to $4,000 for EV purchases through April 2025. We’ll help you understand which incentives apply to your situation.

We also offer discounts for military personnel, first responders, seniors, teachers, students, and new customers. Combined with available rebates, these discounts can significantly reduce your total installation cost. Our goal is making home EV charging as affordable as possible for Palos Park families who’ve made the smart choice to go electric.

A person in a blue shirt installs or services an electric vehicle (EV) charging station on a white wall, with an electrical panel open and wires visible—professional Electrical Services Cook and Will County, IL.

How much does EV charger installation cost in Palos Park?

EV charger installation costs in Palos Park typically range from $500 to $1,200 for a standard Level 2 charger, depending on your home’s electrical setup and the distance from your panel to the installation location. If your electrical panel needs upgrading to handle the additional load, that adds $1,500 to $3,000 to the total cost.However, Illinois residents have access to substantial rebates that can dramatically reduce these costs. ComEd customers can receive up to $3,750 in rebates for Level 2 charger purchase and installation. Additional state and federal incentives may apply. We provide detailed cost estimates that include all applicable rebates and discounts, so you know exactly what you’ll pay out of pocket.The investment pays for itself quickly through savings on public charging fees and taking advantage of lower overnight electricity rates for home charging.
Many homes in Palos Park built before 2000 require electrical panel upgrades to safely support Level 2 EV charger installation. Level 2 chargers draw 32 to 50 amps of power, which is similar to running a clothes dryer or electric water heater.We start every installation with a comprehensive load calculation to determine your panel’s available capacity. If your panel is already near its maximum capacity, or if it’s an older fuse box system, an upgrade becomes necessary for safety and code compliance. Modern panels also provide better protection for your home’s electrical system and your new electric vehicle.Panel upgrades might seem like an added expense, but they’re often necessary improvements that increase your home’s value and electrical safety. Plus, the rebates available through ComEd and other programs help offset these costs significantly.
Most EV charger installations in Palos Park take one full day when your electrical panel has sufficient capacity for the new circuit. This includes running the dedicated 240-volt wiring, mounting the charger, making all connections, and testing the system thoroughly.If your home needs a panel upgrade, the process typically requires two visits. The first day covers the panel upgrade and inspection, while the second day handles the charger circuit installation and final setup. We coordinate all necessary permits and inspections to keep the process moving smoothly.Weather can affect timelines if we need to run wiring outside your home, but we work year-round and plan installations to minimize delays. We’ll give you a realistic timeline during your initial consultation and keep you updated if anything changes.
Palos Park requires electrical permits for EV charger installations to ensure all work meets local safety codes and national electrical standards. The permit process includes plan review and final inspection by a certified electrical inspector.We handle all permit applications and coordinate with local inspectors on your behalf. This includes submitting detailed installation plans, scheduling required inspections, and ensuring everything passes on the first try. Proper permitting protects you, your home, and your electric vehicle from electrical hazards.Skipping permits might seem like a way to save money, but unpermitted electrical work can void your home insurance, create safety hazards, and cause problems when selling your home. Professional installation with proper permits gives you peace of mind and protects your investment.
EV charger installation in Palos Park requires a licensed electrician because it involves 240-volt electrical work that must meet strict safety codes. DIY installation isn’t legal for this type of electrical work and can be extremely dangerous.Level 2 chargers require dedicated 240-volt circuits with proper grounding, GFCI protection, and specific wire sizing based on the charger’s amperage requirements. Incorrect installation can damage your home’s electrical system, create fire hazards, or destroy your electric vehicle’s charging system.Professional installation also ensures you can take advantage of available rebates, which often require licensed contractor installation and proper permits. The cost savings from rebates and the safety benefits of professional installation make DIY installation a poor choice for EV chargers.
Level 1 chargers use standard 120-volt household outlets and typically take 20-24 hours to fully charge an electric vehicle. They’re the slowest charging option and usually only practical for plug-in hybrids or drivers with very low daily mileage.Level 2 chargers use 240-volt circuits (like your clothes dryer) and can fully charge most electric vehicles in 4-8 hours. They’re the standard choice for home installation because they provide practical charging speeds for daily use. Most EV manufacturers recommend Level 2 charging for optimal battery health.For Palos Park homeowners, Level 2 installation makes the most sense because it allows overnight charging that takes advantage of lower electricity rates. You plug in when you get home and wake up to a fully charged vehicle every morning.