EV Charger Installation in Wilmette, IL

Your EV Deserves a Reliable Home Base

Stop planning your life around public charging stations. Get professional EV charger installation that lets you wake up to a fully charged car every morning.

An electrician in Cook and Will County uses wire strippers with red handles to remove insulation from electrical wires, exposing copper cores in a bundle of black, blue, and green wires.

Hear from Our Customers

An electrician Cook and Will County in a helmet and safety vest uses a laptop to monitor or control wall-mounted electrical equipment and a charging station in a modern facility with large windows.

Professional EV Charger Installation Wilmette

Never Hunt for Charging Again

Imagine never having to sit at a public charging station again. No more planning routes around charging availability or paying premium rates for the convenience.

With a properly installed home EV charger, you plug in when you get home and wake up to a fully charged vehicle every single morning. Your car becomes as reliable as your smartphone – always ready when you need it.

The math is simple: home charging costs about 60% less than public stations and eliminates the time cost of waiting around. For most Wilmette residents, that’s hundreds of dollars saved annually, plus hours of your life back.

Licensed EV Charger Installer Wilmette

25 Years of Electrical Excellence

We’ve been solving electrical problems for Wilmette homeowners for 25 years. While other companies are just jumping into EV charger installation, we’ve been handling complex electrical work – from emergency repairs to panel upgrades – since before electric vehicles were mainstream.

Our team knows Wilmette’s electrical infrastructure, permit requirements, and the unique challenges of North Shore homes. We’re licensed, bonded, and insured, with the experience to handle everything from simple installations to complex electrical upgrades.

When you’re investing in an expensive electric vehicle, you want electricians who understand both the technical requirements and the local regulations. That’s exactly what you get with our team.

An electrician Cook and Will County, IL, wearing a safety vest and helmet, uses a multimeter to check wiring inside an electrical panel mounted on a white wall next to a large white device.

EV Charging Station Installation Process

Simple Process, Professional Results

First, we assess your electrical panel and garage setup to determine what’s needed for your specific situation. Every home is different, and we’ll explain exactly what work is required and why.

Next, we handle all permit applications with the Village of Wilmette. Illinois requires permits for Level 2 charger installations, and we know exactly what documentation is needed to get approval quickly.

Finally, we install your charger according to all local codes and manufacturer specifications. We test everything thoroughly and walk you through the operation before we leave. You’ll know exactly how to use your new charger safely and efficiently.

An electrician working on wiring in a residential home in Cook & Will County, IL. The electrician is wearing safety gear, including gloves and a helmet, while handling electrical components inside a circuit panel.

Ready to get started?

Explore More Services

About Jimco Electric

Get a Free Consultation

Wilmette EV Charger Installation Services

Complete Installation Package

Our installation service includes everything you need for safe, code-compliant EV charging at home. We handle the electrical assessment, permit applications, installation, and final inspection.

Wilmette residents can take advantage of significant rebates through ComEd – up to $3,750 for qualified installations. We’ll help you navigate the rebate process and ensure your installation meets all requirements for maximum savings.

We install all major charger brands and can recommend the best option for your vehicle and usage patterns. Whether you drive a Tesla, Ford Lightning, or any other EV, we’ll set you up with the right charging solution for your needs.

A person in a blue shirt installs or services an electric vehicle (EV) charging station on a white wall, with an electrical panel open and wires visible—professional Electrical Services Cook and Will County, IL.

Do I need a permit for EV charger installation in Wilmette?

Yes, the Village of Wilmette requires permits for all Level 2 EV charger installations. This applies to any charger that uses more than a standard 120-volt outlet. The permit process ensures your installation meets all electrical and safety codes. We handle all permit applications for you, including the required documentation and electrical plans. Most permits are approved within a few business days. Skipping the permit process isn’t worth the risk – unpermitted electrical work can cause insurance issues and safety problems. We make sure everything is done properly from the start.
Installation costs typically range from $800 to $2,500, depending on your home’s electrical setup and the charger location. The biggest factor is whether your electrical panel has sufficient capacity and available circuits. If your panel needs upgrades or we need to run new wiring a long distance, costs can be higher. We provide detailed estimates after assessing your specific situation, so you know exactly what to expect. Don’t forget about available rebates – ComEd offers up to $3,750 for qualified installations, and there’s a federal tax credit for 30% of the cost up to $1,000. These incentives can significantly reduce your out-of-pocket expense.
Most homeowners benefit from a Level 2 charger, which uses 240-volt power like your dryer or oven. These chargers add 25-40 miles of range per hour, meaning you can fully charge overnight. Level 1 chargers use regular household outlets but are very slow – only 3-5 miles of range per hour. That’s fine for plug-in hybrids or very low daily driving, but most EV owners find it inadequate. We’ll assess your driving patterns and recommend the right amperage and features for your needs. Smart chargers with WiFi connectivity are popular because they let you schedule charging during off-peak hours for maximum savings.
Most installations take 2-4 hours once permits are approved and materials are ready. Simple installations where your panel has capacity and the charger location is nearby can be completed in about 2 hours. More complex installations requiring panel upgrades or extensive wiring may take a full day. We’ll give you a realistic timeline during our initial assessment. The permit approval process typically adds 3-5 business days to the overall timeline. We schedule your installation as soon as permits are approved and all materials are on-site.
Most modern electrical panels can handle EV charger installation, but older panels may need upgrades. We assess your panel’s capacity, available circuits, and overall condition during our initial visit. A typical Level 2 charger requires a dedicated 40-50 amp circuit. If your panel is already near capacity or lacks available spaces, we may need to upgrade the panel or install a sub-panel. We’ll explain exactly what’s needed for your situation and provide options that fit your budget. Panel upgrades are common in older North Shore homes, and we handle this type of work regularly.
Wilmette residents can access several rebate programs that significantly reduce installation costs. ComEd offers rebates up to $3,750 for qualifying Level 2 charger installations, with higher amounts for income-qualified customers. There’s also a federal tax credit covering 30% of equipment and installation costs, up to $1,000. Some customers qualify for both programs, creating substantial savings. We help you navigate the rebate application process and ensure your installation meets all requirements. The paperwork can be complex, but we’ve handled hundreds of rebate applications and know exactly what’s needed for approval.